澳洲幸运5开奖号码历史查询

Production Possibility Frontier (PPF): Purpose and Use in Economics

How to interpr🅘et this curve and what it means for production efficiency

Definition
The production possibility frontier (PPF) is a curve showing the maximum quantities of two products that can be produced with a finite resource, illustrating trade-offs in production.

What Is the Production Possibility Frontier 📖(PPF)?

The production possibility frontier (PPF) is a curve on a graph that illustrates t🌌he possible quantities that💙 can be produced of two products if both depend upon the same finite resource for their manufacture. The PPF is also referred to as the production possibility curve.

PPF also plays a crucial role in economics. For example, it can demonstrate that a nation’s economy has reached the highest level of efficiency possible.

Key Takeaways

  • When producing goods, opportunity cost is what is given up when you take resources from one product to produce another. The maximum amount that can be produced is illustrated by a curve on a graph.
  • The production possibility frontier (PPF) is above the curve, illustrating impossible scenarios given the available resources.
  • The PPF demonstrates that the production of one commodity may increase only if the production of the other commodity decreases.
  • The PPF is a decision-making tool for managers deciding on the optimum product mix for the company.
Production Possibility Frontier

Joules Garcia / Investopedia

Undersꦇtanding the Production Possibility Frontier (PPF)

The PPF is the area on a graph represe🌞nting production levels that cannot be obt🎉ained given the available resources; the curve represents optimal levels. Here are the assumptions involved:

  • A company/economy wants to produce two products.
  • There are limited resources.
  • Technology and techniques remain constant.
  • All resources are fully and efficiently used.

If a company is deciding how much of each product to produce, it can plot points on a graph representing the number of products ♍made using variables based on amounts of available resources. Considering that resources are limited, if the desire is to produce more of one product, resources must be taken away from the other.

For a Business

As resources are taken from one product and allocated to the other, another point can be plotted on the curve. When you plot the points where more of X will b🅰e produced by taking resources from Y or vice versa, a curve is generated representing the maximum amount of each product that can be produced as resources are reallocated.

For example, if a ♍nonprofit agency provides a mix of textbooks and computers, the curve may show that it can provide either 48 textbooks and six computers or 72 textbooks and two computers. This results in a ratio of about six textbooks to one computer.

The agency’s leadership must determine which item is more urgently needed. In this example, the 澳洲幸运5开奖号码历史查询:opportunity cost of providing an additional 30 textbooks equals five more computers, so it would only be able to give out one computer with 78 textbooks. If it wanted more computꦑers, it would need to reduce the number of textbooks by six for every computer.

Textbooks Computers
18 11
24 10
30 9
36 8
42 7
48 6
54 5
60 4
66 3
72 2
78 1
84 0

When this is plotted, the ar▨ea 🐬below the curve represents computers and textbooks that are not being used, and the area above the curve represents donations that cannot happen with the available resources. The area above the curve is called the production possibility frontier, and the curve (the line itself) is sometimes called the opportunity cost curve. The entire graph is sometimes referred to as the production possibility curve.

The nonprofit could provide 10 textbooks and 10 computers, but this is not using all of its resources. This would be represented by a plot beneath the curve. A plot would be placed above the curve in the frontier area if the company wanted to give more than its resources provided, such as 85 textbooks and no computers or 42 textbooks and 10 computers—it simply can’t do so based on available resources.

For an Economy

This technique can be used by economists to determine the set of points at which a country’s economy is most 澳洲幸运5开奖号码历史查询:efficiently allocating its resources to produce as many goods as possible. If the prꦓoduction level is on the curve, the country can only produce more of one good if it pr🧔oduces less of some other good.

If the economy is producing less than the quantities indicated by the curve, this sign❀ifies that resources are not being used to their full potential. In this case, it is possible to increase the production of some goods without cutting production in other areas.

The production possibility frontier demonstrates that there are limits on production, given that the assumptions hold. Therefore, each economy must decide what combination of goods and services should be produced to at🦹tain maximum resource efficiency.

Production Possibility Frontier (PPF) on a Nationa♊l Scale

Imagine a national economy that can produce only two things: wine and cotton. If points A, B🐲, and C are💧 plotted on a curve, it represents the economy’s most efficient use of resources.

Image
Image by Sabrina Jiang © Investopedia 2020

For instance, producing five units of wine and five units of cotton (point B) is just as attainable as producing three units of wine and seven units of cotton. Point X represents an inefficient use of resources,﷽ while point Y r🅷epresents a goal that the economy simply cannot attain with its present levels of resources.

As we can see, for this economy to produce more wine, it must give up some of🍌 the resources it is currently using to produce cotton (point A). If the economy starts producing more cotton (represented by points B and C), it would need to divert resources from making wine and, consequently, will produce less wine than it is producing at point A.

Moreover, by moving production from point A to B, the economy must decrease wine production by a small amount compared to the increase in cotton 🌃output. But if the economy moves from point B to C, wine output will be reduced by about 50%, while the cotton output only increases by about 75%.

Keep in mind t🐻hat A, B, and C all represent the most efficient allocation of resources for the economy. The nation must decide how to achieve the PPF and which combination to use. For example, if more wine is in demand, the cost of increasing its output is proportional to the cost of decreasing cotton production. Markets play an important role in telling the economy what the PPF should look like.

How the PPF Curve Can Change

Consider point X in the figure above. If a country is producing at point X, that means its resource✨s are not being used efficiently—in other words, the country is not producing enough cotton or wine, given the potential of its resources. On the other han𒉰d, point Y, as we mentioned above, represents an unattainable output level.

Fast Fact

An economy can only be produced on the PPF curve in theory. Economies constantly struggle to reach an optimal production capacity. Scarcity always f🌼orces an economy to forgo some choice in favor oꦰf another.

The only way for the curve to move outward to point Y is if there were an improvement in cotton- and grape-harvesting technology because the available resources—land, labor, and capital—generally remain constant. As output increased, the PPF curve would be pu🍌shed outward. A new curve, represented in the figure on which Y would fall, would show the new optimal allocation of resources.

When the PPF shifts outward, it implies growth in an economy. When it shifts inward, the economy is shrinking due to a failure to allocate resources aജnd optimal production capability. A shrinking economy could result from a decrease i🌞n supplies or a deficiency in technology.

Produ𝓀ction Possibilitℱy Frontier (PPF) and the Pareto Efficiency

The Pareto Efficiency, a concept named after Italian economist Vi🅷lfredo Pareto, measures the efficiency of the commodity allocation on the PPF. The Pareto Efficiency states that any point within the PPF curve is inefficient bꦉecause the total output of commodities is below the output capacity.

Conversely, any point outside the PPF curve is impossible because it represents a mix of commodities that wil༒l require more resources to produce than are currently obtainable.

Therefore, in situations with limited resources, the only efficient commodity mixes lie along the PPF curve, with one commodity on the X axꦿis and the other on the Y axis.

An economy may be able to produce all of the goods and services it needs to function using the PPF as a guide. However, this may lead to an overall inefficient allocation of resources and hinder future growth when the 澳洲幸运5开奖号码历史查询:benefits of trading with other countries are considered.

What Are the 3 Assumptions of the Production Possiblity Frontier?

There are four common assumptions in the model:

  1. The economy is assumed to have only two goods that represent the market.
  2. The supply of resources is fixed or constant.
  3. Technology and techniques remain constant.
  4. All resources are efficiently and fully used.

What Is the Importance of the Production Possibility Frontier?

The PPF demonstrates whether resources are being used efficiently and fully when everything else remains constant. Thus, the variables can be changed to see how the curve reacts, lettꦬing you observe different outcomes.

How Do You Calculate the Production Possibility Frontier?

The simplest method is to 澳洲幸运5开奖号码历史查询:use Excel or Google Sheets. Fill two columns with two variable values, highlight the data, and use the chart wizard. ꦰCreate an XY scatter plot chart an♔d label the X and Y axes.

What Is the Purpose of the Production Possibility Frontier in Economics?

Because the PPF is a curve 澳洲幸运5开奖号码历史查询:based on the data of two variables representing resources between two goods, the data can be manipulated to observe how scarcity, growth, inefficiency, ef🅰ficiency, and other factors can🔯 affect production.

Why Is the Production Possibility Frontier Called the Opportunity Cost Curve?

The PPF identifies the options w🌞hen making a decision. When you decide on one action, you lose the opportunity that the other action provides. Thus, there is an opportunity cost; the PPF curve plots this.

The Bottom Line

The production possibility curve illustrates the maximum possible output for two products when there are limited resources. It also illus༒trates the opportunity cost of making decisions about allocating resources.

Businesses and economists use the production possibility frontier (PPF) to consider possible production scenarios by changing resource variables. The PPF allows businesses to learn how variables influence production or decide which products to manu💝facture. Economists can use it to learn how much of a specific good can be produced in a country while not producing another☂ good to analyze economic efficiency levels and growth.

Open a New Bank Account
The offers that appear in this table are from partnerships from which Investopedia receives compensation. This compensation may impact how and where listings appear. Investopedia does not include all offers available in the marketplace.

Related Articles